View HD74HC4017FPEL_4350019.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HD74HC4017
Decade Counter / Divider
REJ03D0644-0200 (Previous ADE-205-530) Rev.2.00 Mar 30, 2006
Description
The HD74HC4017 is a 5-stage divide-by-10 Johnson counter with ten decoded outputs and a carry-out bit. High-speed operation and spike-free outputs are obtained by use of the Johnson decade counter configuration. The ten decoded outputs are normally low and go high only at their respective decimal time periods. A high signal on Reset R asynchronously clears the decade counter and sets the carry output and Y0 high. With CE low, the count is advanced on a low-to-high transition at C input. Alternatively, if C is high, the count is advanced on a high-to-low transition at CE. Each decoded output remains high for one full clock cycle. The carry output is high while Q0, Q1, Q2, Q3 or Q4 is high, then is low while Q5, Q6, Q7, Q8 or Q9 is high.
Features
* High Speed Operation * High Output Current: Fanout of 10 LSTTL Loads * Wide Operating Voltage: VCC = 2 to 6 V * Low Input Current: 1 A max * Low Quiescent Supply Current: ICC (static) = 4 A max (Ta = 25C) * Ordering Information
Part Name HD74HC4017P HD74HC4017FPEL HD74HC4017RPEL Package Type DILP-16 pin SOP-16 pin (JEITA) SOP-16 pin (JEDEC) Package Code (Previous Code) PRDP0016AE-B (DP-16FV) PRSP0016DH-B (FP-16DAV) Package Abbreviation P FP -- EL (2,000 pcs/reel) EL (2,500 pcs/reel) Taping Abbreviation (Quantity)
PRSP0016DG-A RP (FP-16DNV) Note: Please consult the sales office for the above package availability.
Function Table
C L X X CE X H X L X X H Notes: 1. X: Don't care 2. If n < 5 Carry = "H", Otherwise = "L" R L L H L L L L Decode Output = n n n Q0 n+1 n n n+1
Rev.2.00 Mar 30, 2006 page 1 of 10
HD74HC4017
Pin Arrangement
Q5 Q1 Q0 Q2 Q6 Q7 Q3 GND 1 2 3 4 5 6 7 8 (Top view) Q1 Q0 Q2 Q6 Q7 Q3 Q5 Reset Clock Clock enable Cout Q9 Q4 16 VCC 15 R 14 C 13 CE 12 Cout 11 Q9 10 Q4 9 Q8
Q8
Absolute Maximum Ratings
Item Supply voltage range Input / Output voltage Input / Output diode current Output current VCC, GND current Power dissipation Storage temperature Symbol VCC VIN, VOUT IIK, IOK IOUT ICC or IGND PT Tstg Ratings -0.5 to 7.0 -0.5 to VCC +0.5 20 25 50 500 -65 to +150 Unit V V mA mA mA mW C
Note: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time.
Recommended Operating Conditions
Item Supply voltage Input / Output voltage Operating temperature Input rise / fall time Note:
*1
Symbol VCC VIN, VOUT Ta tr , tf
Ratings 2 to 6 0 to VCC -40 to 85 0 to 1000 0 to 500 0 to 400
Unit V V C
Conditions
VCC = 2.0 V ns VCC = 4.5 V VCC = 6.0 V
1. This item guarantees maximum limit when one input switches. Waveform: Refer to test circuit of switching characteristics.
Rev.2.00 Mar 30, 2006 page 2 of 10
HD74HC4017
Electrical Characteristics
Ta = 25C Item Input voltage Symbol VCC (V) VIH 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 4.5 6.0 2.0 4.5 6.0 4.5 6.0 6.0 6.0 Min 1.5 3.15 4.2 -- -- -- 1.9 4.4 5.9 4.18 5.68 -- -- -- -- -- -- -- Typ -- -- -- -- -- -- 2.0 4.5 6.0 -- -- 0.0 0.0 0.0 -- -- -- -- Max -- -- -- 0.5 1.35 1.8 -- -- -- -- -- 0.1 0.1 0.1 0.26 0.26 0.1 4.0 Ta = -40 to+85C Min 1.5 3.15 4.2 -- -- -- 1.9 4.4 5.9 4.13 5.63 -- -- -- -- -- -- -- Max -- -- -- 0.5 1.35 1.8 -- -- -- -- -- 0.1 0.1 0.1 0.33 0.33 1.0 40 Unit V Test Conditions
VIL
V
Output voltage
VOH
V
Vin = VIH or VIL IOH = -20 A
VOL
V
Vin = VIH or VIL
IOH = -4 mA IOH = -5.2 mA IOL = 20 A
Input current Quiescent supply current
Iin ICC
IOH = 4 mA IOH = 5.2 mA A Vin = VCC or GND A Vin = VCC or GND, Iout = 0 A
Rev.2.00 Mar 30, 2006 page 3 of 10
HD74HC4017
Switching Characteristics (CL = 50 pF, Input tr = tf = 6 ns)
Ta = 25C Item Maximum clock frequency Propagation delay time Symbol VCC (V) fmax 2.0 4.5 6.0 tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL Pulse width tw 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 Hold time th 2.0 4.5 6.0 2.0 4.5 6.0 Output rise/fall time Input capacitance tTLH tTHL Cin 2.0 4.5 6.0 -- Min -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 80 16 14 75 15 13 50 10 9 100 20 17 -- -- -- -- Typ -- -- -- -- 20 -- -- 19 -- -- 21 -- -- 20 -- -- 18 -- -- 13 -- -- 5 -- -- 5 -- -- 4 -- -- -3 -- -- 6 -- 5 Max 6 31 36 230 46 39 230 46 39 250 50 43 250 50 43 230 46 39 230 46 39 -- -- -- -- -- -- -- -- -- -- -- -- 75 15 13 10 Ta = -40 to +85C Min -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 100 20 17 95 19 16 65 13 11 125 25 21 -- -- -- -- Max 5 27 31 290 58 49 290 58 49 315 63 54 315 63 54 290 58 49 290 58 49 -- -- -- -- -- -- -- -- -- -- -- -- 95 19 16 10 ns ns ns ns R to Q ns CE to Q ns C to Q Unit MHz Test Conditions
ns
C to Cout
ns
CE to Cout
ns
R to Cout
Setup time
tsu
ns
Removal time
trem
ns
pF
Rev.2.00 Mar 30, 2006 page 4 of 10
HD74HC4017
Test Circuit
VCC VCC
See Function Table
Input Pulse Generator Zout = 50 Input Pulse Generator Zout = 50
CE Q0 to Q9 Clock Cout Reset
Output
Output
CL = 50 pF
CL = 50 pF
Note : 1. CL includes probe and jig capacitance.
Waveforms
* Waveform - 1
tr Clock tf VCC
50% 50% 50%
0V tw tPLH
90%
tw tPHL
90% 50% 10%
VOH VOL
Qn
50% 10%
tTLH
tTHL
Notes : 1. Input waveform: PRR 1 MHz, Zo = 50 , tr 6 ns, tf 6 ns 2. Other inputs : R = "L", CE = "L"
Rev.2.00 Mar 30, 2006 page 5 of 10
HD74HC4017
* Waveform - 2
tr Clock tf VCC
50% 50% 50%
0V tw tPLH (Measure at tn+10)
90%
tw tPHL (Measure at tn+5)
90% 50% 10%
VOH VOL
Cout
50% 10%
tTLH
tTHL
Notes : 1. Input waveform : PRR 1 MHz, Zo = 50 , tr 6 ns, tf 6 ns 2. Other inputs : R = "L", CE = "L" tn is bit time with Q1 to Q9 at low.
* Waveform - 3
tf CE
90% 50% 10% 10%
tr
90% 50%
VCC
50%
tw tPLH
90%
tw tPHL
90% 50% 10%
0V
VOH VOL
Qn
50% 10%
tTLH
tTHL
Notes : 1. Input waveform : PRR 1 MHz, Zo = 50 , tr 6 ns, tf 6 ns 2. Other inputs : R = "L", C = "H"
Rev.2.00 Mar 30, 2006 page 6 of 10
HD74HC4017
* Waveform - 4
tr CE tf VCC
50% 50% 50%
0V tw tPLH (Measure at tn+10)
90%
tw tPHL (Measure at tn+5)
90% 50% 10%
VOH VOL
Cout
50% 10%
tTLH
tTHL
Notes : 1. Input waveform : PRR 1 MHz, Zo = 50 , tr 6 ns, tf 6 ns 2. Other inputs : R = "L", C = "H" tn is bit time with Q1 to Q9 at low.
* Waveform - 5
tr
90 % 50 % 10 % 90 % 50 % 10 %
tf VCC 0V
Reset
tw
VOH Q1 to Q9 t PHL t PLH VOH Q0, Cout
50 % 50 %
VOL
VOL Note : 1. Input waveform : PRR 1 MHz, Zo = 50 , tr 6 ns, tf 6 ns
Rev.2.00 Mar 30, 2006 page 7 of 10
HD74HC4017
* Waveform - 6
tf
90% 50% 10%
VCC 0V tr
90% 50% 10%
Reset
trem CE th
90% 90%
VCC 0V
tsu VCC
50% 10%
Clock
50% 10%
0V
tr
tf
Note : 1. Input waveform : PRR 1 MHz, Zo = 50 , tr 6 ns, tf 6 ns
* Waveform - 7
tf
90% 50% 10%
VCC 0V tf
90% 50% 10%
Reset
trem
VCC 0V
Clock th CE
90%
tsu VCC
50%
90% 50% 10% 10%
0V
tf
tr
Note : 1. Input waveform : PRR 1 MHz, Zo = 50 , tr 6 ns, tf 6 ns
Rev.2.00 Mar 30, 2006 page 8 of 10
HD74HC4017
Package Dimensions
JEITA Package Code P-DIP16-6.3x19.2-2.54 RENESAS Code PRDP0016AE-B Previous Code DP-16FV MASS[Typ.] 1.05g
D
16
9
1 0.89 b3
8
Z
A1
A
E
Reference Symbol
Dimension in Millimeters
Min
e
bp
e1
c
( Ni/Pd/Au plating )
e1 D E A A1 bp b3 c e Z L
Nom Max 7.62 19.2 20.32 6.3 7.4 5.06
L
0.51 0.40 0.48 0.56 1.30 0.19 0.25 0.31 0 15 2.29 2.54 2.79 1.12 2.54
JEITA Package Code P-SOP16-5.5x10.06-1.27
RENESAS Code PRSP0016DH-B
Previous Code FP-16DAV
MASS[Typ.] 0.24g
*1
D F 9
16
NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET.
bp
HE
E
Index mark
*2
Terminal cross section ( Ni/Pd/Au plating )
1 Z e
*3
8 bp x M L1
Reference Symbol
c
Dimension in Millimeters
A1
y
L
Detail F
D E A2 A1 A bp b1 c c1 HE e x y Z L L1
Min Nom Max 10.06 10.5 5.50 0.00 0.10 0.20 2.20 0.34 0.40 0.46 0.15 0.20 0.25 0 8 7.50 7.80 8.00 1.27 0.12 0.15 0.80 0.50 0.70 0.90 1.15
Rev.2.00 Mar 30, 2006 page 9 of 10
A
HD74HC4017
JEITA Package Code P-SOP16-3.95x9.9-1.27 RENESAS Code PRSP0016DG-A Previous Code FP-16DNV MASS[Typ.] 0.15g
*1
D 9
F
16
NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET.
bp
E HE
Index mark
*2
Terminal cross section ( Ni/Pd/Au plating )
1 Z e
*3
c
8 bp x M L1
Reference Symbol
Dimension in Millimeters
A1
L
y
Detail F
D E A2 A1 A bp b1 c c1 HE e x y Z L L1
Min Nom Max 9.90 10.30 3.95 0.10 0.14 0.25 1.75 0.34 0.40 0.46 0.15 0.20 0.25 0 8 5.80 6.10 6.20 1.27 0.25 0.15 0.635 0.40 0.60 1.27 1.08
Rev.2.00 Mar 30, 2006 page 10 of 10
A
Sales Strategic Planning Div.
Keep safety first in your circuit designs!
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
http://www.renesas.com
Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510
(c) 2006. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .6.0

▲Up To Search▲

Price & Availability of HD74HC4017FPEL

	To Download HD74HC4017FPEL Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .